YAV90132 32 Channel 5A SPDT relays
€1029
YAV90132
Features
? Up to 5A per relay contact
? Tripaddle VPC receiver fixture
? Built in stabilized power supply
? Self module identifier
Applications
? Stimulus, load, by-pass, etc. switching
The YAV90132 has 28 independent operating switching relays and 4 normally open relays with one common:
? 1x 28 relays with common contact (NO and NC)
? 1x 4 relays with normally open contact with one common
A typical application is signal routing in automatic test systems, where it is imperative to ensure a real disconnection of one signal before the injection of another one.
The availability of the three contacts (Common, NO and NC) offer the configuration of different switching combinations, from tree type to matrix type switching, with total maximum current up to 5A.
The board is controlled by a for pole connector containing the 24Vdc input, to power the board and all relays. The same connector contains also the two Can bus lines to control the YAV90132.
The module features a logic address setting by means of a set of dip switches. A maximum of 64x YAV90132 boards are possible in one test system.
A virtual software panel, that can be used with National Instruments LabView� or TestStand�, is available to simply integrate the instrument into the test sequence.
Rated current | 2 A |
Rated voltage | 240 VAC |
Mechanical endurance of relays | 15 x 106 cycles |
Power supply
Rated operation voltage | 19 ? 29 VDC |
Max. current req. @ 24Vdc | 390mA |
[youtube https://www.youtube.com/watch?v=YTRr1BOvVPg?rel=0]